Reversible Thread Plug Gage Manufacturer
CLASS X TOLERANCE – RH – CHROME
What are Reversible Thread Plug Gages Used For?
Reversible thread plug gages are used to check the accuracy and dimension of parts that require high tolerances and a need for great accuracy, such as those used in the medical, oil/gas and aerospace industries.
A thread plug gage measures the dimensions of a part by entering or not entering the internal thread (inside the hole of a part as required).The Go end should engage and the Not Go(NoGo) end should not engage the part. This is known as fixed limit gaging.
| Nominal Size | Handle Size |
|---|---|
| .060 0 – 80 | 1W |
| .073 1 – 64 | 1W |
| .073 1 – 72 | 1W |
| .086 2 – 56 | 2W |
| .086 2 – 64 | 2W |
| .099 3 – 48 | 2W |
| .099 3 – 56 | 2W |
| .112 4 – 40 | 2W |
| .112 4 – 48 | 2W |
| .125 5 – 40 | 2W |
| .125 5 – 44 | 2W |
| .138 6 – 32 | 2W |
| .138 6 – 40 | 2W |
| .164 8 – 32 | 2W |
| .164 8 – 36 | 2W |
| .190 10 – 24 | 3W |
| .190 10 – 32 | 3W |
| .216 12 – 24 | 3W |
| .216 12 – 28 | 3W |
| 1/4 – 20 | 3W |
| 1/4 – 28 | 3W |
| 5/16 – 18 | 4W |
| 5/16 – 24 | 4W |
| 3/8 – 16 | 4W |
| 3/8 – 24 | 4W |
| 7/16 – 14 | 5W |
| 7/16 – 20 | 5W |
| 1/2 – 13 | 5W |
| 1/2 – 20 | 5W |
| 9/16 – 12 | 6W |
| 9/16 – 18 | 6W |
| 5/8 – 11 | 6W |
| 5/8 – 18 | 6W |
| 3/4 – 10 | 7W |
| 3/4 – 16 | 7W |
| Nominal Size | Handle Size |
|---|---|
| M 1.6 x 0.35 | 1W |
| M 2 x 0.4 | 2W |
| M 2.5 x 0.45 | 2W |
| M 3 x 0.5 | 2W |
| M 3.5 x 0.6 | 2W |
| M 4 x 0.7 | 2W |
| M 5 x 0.8 | 3W |
| M 6 x 1.0 | 3W |
| M 8 x 1.25 | 4W |
| M 8 x 1.0 | 4W |
| M 10 x 1.5 | 4W |
| M 10 x 1.25 | 4W |
| M 10 x 1.0 | 4W |
| M 10 x 0.75 | 4W |
| M 12 x 1.75 | 5W |
| M 12 x 1.5 | 5W |
| M 2 x 1.25 | 5W |
| M 12 x 1.0 | 5W |
| M 14 x 2.0 | 6W |
| M 14 x 1.5 | 6W |
| M 15 x 1.0 | 6W |
| M 16 x 2.0 | 6W |
| M 16 x 1.5 | 6W |
| M 17 x 1.0 | 7W |
| M 18 x 1.5 | 7W |
Inch
| Nominal Size | Handle Size |
|---|---|
| 12 – 32 | 3W |
| 1/4 – 32 | 3W |
| 5/16 – 32 | 4W |
| 3/8 – 32 | 4W |
| 7/16 – 28 | 5W |
| 1/2 – 28 | 5W |
| 9/16 – 24 | 6W |
| 5/8 – 24 | 6W |
| 11/16 – 24 | 7W |
| 3/4 – 20 | 7W |
Class
2B, 3B
- Graphitic tool steel for superior quality and longer wear
- Heat treated and cold treated for extreme stability.
- Lapped for extra precision and longer wear.
Hard Chrome
All standard thread plugs are supplied in hard chrome at no additional cost.
